Pages

▼

START WEAVING MAGAZINE COASTERS

The woven magazine coaster is something easy to make. It makes a great gift too. Many friends have asked how it is made. We have taken time to compile some photographed steps. This will help some of you who want to experiment...

Take a piece of magazine spread and measure it by a quarter.

Fold the quarter into half.

And from the half, a third.

Fold it into half again to hide the edges of the magazine paper. This will help to reinforce the paper and prevent it from tearing.

Fold the strip into half.

Lock the first 2 strips together.

This provides a solid base/start to your weaving. It is locked and will not come apart.

This is the following steps. You should not do the locking anymore. It should be everything in the "V" of the strip or out of the strip, alternately. A regular coaster needs about 8 x 8 strips. You will have to put them tight to make a perfect square. If not, it will be loose and more of a rectangle. We will post more tips and tricks soon. Meanwhile, have fun weaving and enjoy those icy cold drinks. Magazine coasters are really good at absorbing water.

FULL INSTRUCTIONS HERE.

31 comments:

  1. Lolo4 June 2008 at 12:36

    I have used those coasters, it works really well, and it's quite easy to make, Great Idea !

    ReplyDelete
  2. Anonymous20 December 2008 at 08:25

    Great idea, and great tutorial. I am going to have to try to make some of these.

    ReplyDelete
  3. Stephiekins21 December 2008 at 11:48

    That is wonderful! I have a quick question, though...how do you finish off the ends/the project itself?

    ReplyDelete
  4. Anonymous24 December 2008 at 14:15

    What do you mean by locking it? i don't get it

    ReplyDelete
  5. Anonymous29 December 2008 at 12:11

    You cut the end of the strip, so that it is about 1.5 to 2 square long and tuck it in without showing the loose strip. You should be able to gauge that folding it down without weaving it first.

    ReplyDelete
  6. Anonymous29 December 2008 at 12:12

    Locking it means interlocking it so that the initial 2 strips do not separate when you pull them apart.

    ReplyDelete
  7. Anonymous1 January 2009 at 00:02

    Why not just fold the whole magazine page 4 times and slap it down and use that as a coaster... skip all this artsy fartsy stuff!

    ReplyDelete
  8. Anonymous4 January 2009 at 12:14

    If you cover the finished product with clear nail polish the colours don't bleed when they get wet and the coasters last longer.

    ReplyDelete
  9. Jiya James8 January 2009 at 14:24

    Those coasters are too good bingo numbers games.

    ReplyDelete
  10. Anonymous25 January 2009 at 16:53

    I am addicted to making these! Thanks for the great idea and they work great to. I found you featured on Tipnut, congratulations!

    ReplyDelete
  11. Jennwith426 January 2009 at 08:12

    Made my first one and on to my next.

    ReplyDelete
  12. Anonymous16 February 2009 at 10:49

    confusing

    ReplyDelete
  13. ironik28 February 2009 at 05:46

    Thanks for the idea :) I like it a lot!

    ReplyDelete
  14. Anonymous19 March 2009 at 22:44

    I dont understand how to finish it off!!

    i made mine and now it looks like crap because i tried tucking in the ends but it wouldnt stay so i stapled it and then i put ribbon over the staples lol

    wow i need to redo it.

    ReplyDelete
  15. Anonymous20 March 2009 at 08:22

    Do they get ruined after a few times they are used because of condensation??

    ReplyDelete
  16. Anonymous26 March 2009 at 10:42

    not at all. they absorb the water and dries fairly quickly

    ReplyDelete
  17. scrappinkay19 May 2009 at 23:00

    this looks fun. What size exactly does the beginning piece of magazine paper need to be?

    ReplyDelete
  18. Anonymous28 May 2009 at 23:18

    directions confusing

    ReplyDelete
  19. Anonymous4 June 2009 at 22:59

    I guess FF posted this as a starter for everyone. They would eventually sell this though. I would suppose that the beginning size is of a normal magazine, like one strip is folded from a quarter of a magazine page. I know for sure they used vogue magazine pages.

    ReplyDelete
  20. Anonymous20 June 2009 at 16:58

    If I tuck the loose ends they are falling apart. Do I nee to glue them in place?

    ReplyDelete
  21. Shore Debris28 July 2009 at 05:19

    This was fun! I created my first coaster 4 nights ago, although it does not look near as good as the pictures here because I was adjusting mine too much and made the edges of my folds look worn. Maybe the next one will look better :) Look out - I have like 100 magazines lying around my house!

    ReplyDelete
  22. Anonymous6 October 2009 at 05:17

    hi great idea, going to have a go to make it. I am also looking for instructions on how to weave using magazines or newspapers to make a waste paper basket. Any ideas or links to websites you could suggest?

    ReplyDelete
  23. Prajakta Thanekar28 February 2010 at 02:05

    Your tutorial made it really simple to make those coasters. And they look nice and colorful.

    ReplyDelete
  24. Anonymous14 June 2010 at 17:14

    My name is Carey, I am the editor of an English-language cultural magazine in Barcelona, Spain (miniguide.es).

    We would like to feature your DIY magazine coaster project in our next issue for August and September, could you please email me at: carey@miniguide.es to discuss details.

    Thanks, and great project!

    ReplyDelete
  25. Anonymous17 September 2010 at 04:21

    Wow neat! This is a really great site! I am wondering if anyone else has come across something
    similar in the past? Keep up the great work!

    ReplyDelete
  26. Anonymous26 November 2010 at 00:08

    Hi,

    This is a inquiry for the webmaster/admin here at projectfidgetyfingers.blogspot.com.

    Can I use some of the information from your blog post right above if I provide a backlink back to this website?

    Thanks,
    William

    ReplyDelete
  27. Fidgety Fingers26 November 2010 at 01:29

    Definitely William. Please email us at fidgetystudio@gmail.com to tell us more.

    ReplyDelete
  28. Anonymous6 December 2010 at 19:17

    Hi,

    Thanks for sharing the link - but unfortunately it seems to be down? Does anybody here at projectfidgetyfingers.blogspot.com have a mirror or another source?


    Thanks,
    John

    ReplyDelete
  29. suzene6 December 2010 at 20:23

    Hi John, are you sure the link does not work? Seems t work fine for us. Try this then http://projectfidgetyfingers.blogspot.com/2010/06/start-weaving-magazine-coasters.html

    ReplyDelete
  30. Anonymous8 December 2010 at 10:41

    This comment has been removed by a blog administrator.

    ReplyDelete
  31. resep kue28 November 2015 at 11:28

    The article is very interesting and nice, I hope you can also visit my website to thank you!

    ReplyDelete